WP 10-140F Portable Four-stroke Gasoline Engine Water Pump Water Irrigation

  

Product parameters: Model: WP 10-140F Engine model: 140F-3 Engine type: single-cylinder, air-cooled, four-stroke gasoline engine. Engine displacement: 38cc Maximum power and speed: 1.2kw, 8500r/min Fuel tank volume: 650ml Engine oil tank volume: 80ml Maximum suction range: 7m Maximum lift: 30m Suitable water pipe size: Water pump inlet: 1" (25mm) Pump outlet: 1" (25mm) Flow rate: 8000L/hour Gross/net weight: 10kg/8.2kg Packing size: 38x35x30cm/14.9611.8113.78in Product size: 362832cm/14.1711.0212.60in Start mode: pull start.

WP 10-140F Portable Four-stroke Gasoline Engine Water Pump Water Irrigation. WP 10-140F portable four-stroke gasoline engine water pump pump is suitable for garden lawn watering, field pumping, drainage operations, clothing crops, green seedlings, irrigation and fertilization, etc. Engine oil tank volume: 80ml. Water pump inlet: 1 (25mm). Packing size: 38x35x30cm/14.9611.8113.78in.

Equipped with four-stroke 140F-3 new power, super easy to start. Low fuel consumption, stable performance, long service life and low failure rate. Small size, light weight, convenient transition and simple operation. Low noise, low emissions and no pollution. First use: Choose genuine four-stroke gasoline engine oil and add it to the engine oil tank, about 80ml.

Replace it every 100 working hours in the future. Fill the fuel tank and engine oil tank with gasoline and engine oil respectively. Turn on the oil circuit switch. Open the water filling cover above the water pump. Fill up the water diversion, use the card link to connect the water inlet pipe note that all connections of the water inlet pipe cannot leak.

Air leakage will cause the water to be unable to absorb. Close the damper and pull the starter. After starting, open the throttle and increase the throttle to start working.

(If there are signs of starting but failed to start, please open the damper and continue to pull the starter). Good use and maintenance habits. It will make your machine work more efficiently.

Note: After each work, run at idle speed for 2-3 minutes, and turn off the engine after the engine temperature drops to increase the service life. Feedback is very important to us. It is impossible to address issues if we do not know about them!

Faction is our ultimate goal. We work hard to earn your trust and future business.

A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. This item is in the category "Home & Garden\Home Improvement\Plumbing & Fixtures\Pumps & Water Filtration Systems\Pumps".

The seller is "autocomponents999" and is located in this country: US. This item can be shipped to United States.

1. * Feature *: Creative Design，Durable Material，Beautiful Appearance
2. Feature 1: Easy installation,Convenient Use,Easy Operation
3. Installation: see description
4. Horse Power: 1.2kw
5. Energy Star: Not Compliant
6. Manufacturer Warranty: Other: See Item Description
7. Item Height: see picture
8. Item Length: see picture
9. Item Width: see picture
10. Brand: Unbranded
11. Type: Gasoline Engine Water Pump
12. Power: 1.2kw
13. Maximum Flow Rate: 8000L/hour
14. Size: 36*28*32cm/14.17*11.02*12.60in
15. Item Weight: 8.2kg
16. Model: WP 10-140F
17. Maximum Head Lift: 30m
18. Engine model: 140F-3
19. Engine displacement: 38cc
20. Fuel tank volume: 650ml
21. Engine oil tank volume: 80ml
22. Maximum suction range: 7m
23. Water pump inlet: 1” (25mm)
24. Pump outlet: 1” (25mm)
25. Start mode: pull start