Cambridge Engineering Rxheat Direct Gas Fire Construction Heater Portable Cs1200

  

CAMBRIDGE ENGINEERING RXHEAT DIRECT GAS FIRE CONSTRUCTION HEATER PORTABLE CS1200. SPECIALTY CONTRACTOR MACHINE DESIGNED FOR BUILDING DRYING AND BEDBUG ERADICATION. Features an enclosed, clean-burning flame that operates on natural gas or propane; SMART temperature control technology; and the ability to raise structural temperatures quickly with forced air. This heater is designed for outdoor use only.

It is intended for use in providing portable, temporary heat to buildings under. Adequate ventilation must be provided while heater is operating. As building materials, paper or cardboard must be kept a minimum of 6 inches from the sides and top of the heaters, 0 inch. Ever use this heater in spaces which do or may contain volatile or airborne combustibles, or products. Such as gasoline, solvents, paint thinner, dust particles or unknown chemicals.

Adequate building relief shall be provided so as to not over pressurize the building when this heater is operating at its rated. It should be noted that this can be accomplished by taking into account, through.

Standard engineering methods, the structure's designed infiltration rate, by providing properly sized relief openings. By interlocking a powered exhaust system or by a combination of these methods. CS-Series Heater, with high temperature rise Blow-Thru. Technology, includes a control system. That is designed to electronically modulate the gas flow using an amplifier, discharge temperature sensor and heat.

The discharge temperature sensor, which is mounted in the heater's discharge air stream, transmits a. Resistance signal back to the amplifier that corresponds to the discharge temperature. The amplifier creates a voltage. Output to drive an electronic proportioning gas valve to maintain the pre-selected temperature that is set on the heat. CS-Series Heater is provided with a variable frequency drive (VFD) to allow for variable air.

Volume between 4000 and 6000 CFM. The VFD air volume control is located in the operator interface panel. The VFD also limits the fan motor inrush current, allowing the heater to be powered by generator. SIMILAR ITEM DESCRIPTION/ADDITIONAL INFO FROM A SIMILAR MADE UNIT. Features variable airflow from 2,500 to 4,000 cubic feet per minute and is perfect for treating single-family residences and multiple apartment units, with the ability to be ducted up to eight stories high.

Features variable airflow from 4,000 to 6,000 cubic feet per minute and is capable of providing fast heat to larger residences, multiple-unit apartment buildings and office buildings as it can be ducted up to 10 stories high. Powerful, compact and energy efficient, the RxHeat units provide clean, high-capacity, controlled heating and drying, and are especially effective for clean water intrusions from pipe breaks.

Time is of the essence in the restoration industry, and RxHeat Drying Systems provide restoration and remediation professionals with a powerful tool for quick dry-outs, leading to happy adjusters and satisfied clients. RxHeat Drying Systems can pay for themselves after just a few water losses.

Recent bedbug infestations have plagued the hospitality industry, especially in the Northeast, Pacific Northwest, Midwest and South. High heat has the ability to kill bedbug adults, larvae and eggs, eliminating not only the current infestation but also that of generations to come. RxHeat Systems provide an alternative to unreliable and undesirable chemical solutions, giving pest control operators a truly green, quick and dependable solution for their clients. And, because the two sizes allow for both smaller and larger commercial applications, RxHeat Systems are the go-to tool for pest control contractors with residential or commercial clients.

These units been shown to pay for themselves with a minimal number of infestation treatments. RxHeat Drying Systems by Cambridge Engineering - providing safe, efficient, green, dependable and portable solutions for remediation and pest control professionals. Upon invoicing, and varies on a case by case basis, depending on the item. We do our best to describe each item accurately, message us with any questions. The GRS Liquidations inventory changes daily!

If you do not see something you are looking for, reach out to us directly to inquire if we have something that may not be listed here!